http://ir-heat-expert.com/en/tags/dryer/ Recent content in Dryer on Expert Infrared Heat Solutions Hugo en-us Mon, 20 Jul 2026 12:05:01 +0800 http://ir-heat-expert.com/en/posts/high-gloss-glass-finish-dryer/ Mon, 20 Jul 2026 12:05:01 +0800 http://ir-heat-expert.com/en/posts/high-gloss-glass-finish-dryer/ <p><img src="http://ir-heat-expert.com/images/b5cae4636e88247491fa9168385af439.png" alt="High gloss glass finish dryer"></p> <h1 id="fixing-those-annoying-cold-spots-in-glass-annealing">Fixing Those Annoying Cold Spots in Glass Annealing</h1> <p>If you&rsquo;ve ever worked with glass that has a tricky shape—think tight necks, sharp shoulders, or a heavy base—you know the headache of &ldquo;dead zones.&rdquo; Standard kilns just can&rsquo;t hit every spot. You end up with these cold pockets that leave internal stress in the glass. And we&rsquo;ve all been there: you think the piece is fine, and then it just&hellip; pops. Spontaneous breakage is a nightmare. To stop that, we started putting shortwave infrared (IR) <a href="https://goldisgood.com">lamps</a> right into the kiln. It&rsquo;s <a href="https://o-yate.com">basically</a> like giving the kiln a set of spotlights to hit the glass exactly where it needs it.</p> http://ir-heat-expert.com/en/posts/decorative-glass-ink-dryer/ Tue, 07 Jul 2026 08:08:27 +0800 http://ir-heat-expert.com/en/posts/decorative-glass-ink-dryer/ <p><img src="http://ir-heat-expert.com/images/d5b2b901160b4c1f253db0bf470a9831.png" alt="Decorative glass ink dryer"></p> <h2 id="introduction">Introduction</h2> <p>We built this shortwave infrared halogen lamp for one reason: to dry decorative glass ink the right way. You need to strip out moisture fast—without wrecking the color. Traditional hot air? It’s slow and wasteful. This lamp goes straight after the water, not the pigment. The result? The ink stays true, and the job gets done.</p> <h2 id="power-voltage-and-size-the-practical-details">Power, Voltage, and Size: The Practical Details</h2> <p>This thing runs on 400V, not the usual 230V, because we fit 2500W of heat into a compact 300mm tube. That higher voltage keeps the current manageable, so you don’t need to overhaul your wiring or hunt down oversized contacts just to handle the load. And the short 300mm length? It gives you a tight thermal footprint. Easy to slot into your existing line without tearing apart the whole oven area.</p>